Oil life reset – Ram Trucks 2015 Chassis Cab Commercial - Diesel Supplement User Manual

Page 204

Advertising
background image

Vehicles Not Equipped With Passive Entry

1. Without pressing the brake pedal, cycle the ignition to

the ON/RUN position (do not start the engine.)

2. Press and release the DOWN arrow button to scroll

downward through the main menu to “Vehicle Info”.

3. Press and release the RIGHT arrow button to access

the ”Fuel Filter Life” screen.

4. Press and hold the RIGHT arrow button for one

second to access the ”Fuel Filter Life Reset” screen.

5. Press and hold the RIGHT arrow button for one

second to access the Reset Confirmation screen.

6. Press and release the UP or DOWN arrow button to

select “Yes” or “No” then press and hold the RIGHT

arrow button to reset the Fuel Filter Life.

7. Press and release the Up arrow button to exit the EVIC

screen once the Fuel Filter Life is 100%

NOTE:

If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not

reset. If necessary, repeat this procedure.

Oil Life Reset

Your vehicle is equipped with an engine oil change

indicator system. The “Oil Change Required” message

will flash in the DID display for approximately 10

seconds after a single chime has sounded, to indicate the

next scheduled oil change interval. The engine oil change

indicator system is duty cycle based, which means the

engine oil change interval may fluctuate, dependent

upon your personal driving style.
NOTE:

Use the steering wheel DID controls for the

following procedure(s)

202 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising