SeaLand DTM01 Tank Monitor - Manual (Page 4)

4
3 Intended use
(fig. 1
, page 2)
DTM01 Tank Monitor panel indicates when a wastewater holding tank is almost
full. This monitor helps prevent damage to the boat that can happen because of
accidental overfilling of the holding tank.
Caution!
Do not use in fuel tank.
Intended use DTM01 Tank Monitor
4 Components and functions
(fig. 2
, page 2)
Probe Assembly with Float Switch
The probe assembly installs into a 1.25-inch (32 mm) dia. opening on the
top of a Dometic
® holding tank or other holding tank. As the level of holding
tank contents rises, the float switch inside the tank is pushed upward and
activates the “Full Tank” light on the indicator panel.
Indicator Panel
The indicator panel has a single light which is activated by the float switch
inside the holding tank. When the “Full Tank” light is activated, the opera-
tion of any plumbing fixture connected to the holding tank should stop until
the tank is emptied.
Item Description
1 Probe assembly with float switch
2 #8 fasteners for probe assembly
3 Indicator panel
4 #6 fasteners for indicator panel
Caution!
Operator must know local regulations for emptying a holding tank.