SIG SAUER P938P - Manual (Page 48)

www.sigsauer.com 48
Step 2
Step 3b
Step 3a
1. ensure the magazine is removed and the pistol is unloaded (see section 6.0
“unloading the Pistol”)
2. check recoil spring function & slide travel
a. retract slide fully and release
b. Verify slide locks fully in the closed position
c. repeat the procedure
3. check trigger mechanism and thumb safety
a. Place thumb safety on (safety uP)
b. depress trigger – hammer should noT fall
Step 3c
Step 3d
c. Place thumb safety off (safety down) – hammer should noT fall
d. depress trigger – hammer should fall