SilentKnight SKE-450 Voice Evacuation Control Panel - Manual (Page 47)

SKE-ZN6 Six Zone Splitter Installation
151267 6-3
6.1.2 Terminal Strip 2
This sections describes what the terminal connections of terminal strip 5 are used for.
Terminal Name Description
EOL 1
Raw speaker signal from DMR (un-split), used for End of Line supervision.
AUDIO1
+ Not Used.
–
IN6
+ Speaker 6 return positive connection, used for Class A (Style Z) configuration.
– Speaker 6 return negative connection, used for Class A (Style Z) configuration.
OUT6
+ Speaker output 6 positive connection, used for Class B (Style Y) configuration.
– Speaker output 6 negative connection, used for Class B (Style Y) configuration.
IN5
+ Speaker 5 return positive connection, used for Class A (Style Z) configuration.
– Speaker 5 return negative connection, used for Class A (Style Z) configuration.
OUT5
+ Speaker output 5 positive connection, used for Class B (Style Y) configuration.
– Speaker output 5 negative connection, used for Class B (Style Y) configuration.
IN4
+ Speaker 4 return positive connection, used for Class A (Style Z) configuration.
– Speaker 4 return negative connection, used for Class A (Style Z) configuration.
OUT4
+ Speaker output 4 positive connection, used for Class B (Style Y) configuration.
– Speaker output 4 negative connection, used for Class B (Style Y) configuration.