Solvline Eddy Serial Ver 2.1.0.3 User Manual
Page 29
Chapter4. Integration
29
◆ Factory default alias IP address: 10.10.1.1
In case you configure Eddy to use DHCP to obtain an IP address automatically, you might find it hard to know the IP
address to connect to. To provide users with an easier way to know the current IP address, Eddy has a fixed alias IP
that is always accessible. Use the address below whenever you cannot find out Eddy’s IP address.
In order to connect with this address, you need to change network configurations so that your PC can connect to the
IP 10.10.1.1. Please refer to an example below, and note that values do not necessarily have to be identical to the
example below.
Since Eddy-S4M doesn’t support LAN port so that doesn’t include bellow.
◆ Connection via Detector
By running the Detector program in the Utility & Documents CD included in the Eddy package, you can dynamically
search for all Eddy modules on the network and connect to any module. (For more information on Detector, please
refer to the Portview manual in the Utility & Documents CD included in the Eddy package)
After running Detector, click Search button on the top-left to display all Eddy modules on the network. Select the
module that you would make a connection to, and click Telnet or Web to connect to the module via Telnet or Web,
respectively.