Solvline Eddy Serial Ver 2.1.0.3 - Manual (Page 58)

Chapter7. Appendix
58
6.4 WiFi commands
Bellow are instruction and function which enable WiFi Network.
명령어 디폴트 설명
def wifi wireless
<Enable/ disable)
disable
Determine whether to use Eddy-WiFi module
det wifi mode
[infrastructure
/ ad-hoc]
infrastructure Configure the active mode of wireless LAN
def wifi network
<802.11 b/g mixed,
802.11b only,
802,11g only,
802.11a only,
802.11 a/b/g
mixed>
802.11 b/g mixed Configure the active protocol of wireless network.
def wifi ssid
<SSID string>
None Configure wireless network name (SSID) you want connect.
def wifi channel
<Auto, 1 ~ 13)
Auto Select frequency which used for wireless connection.
def wifi bitrate
<auto,
1,2,5,6,9,11,12,18,2
4,36,48,54>
Auto Configure the speed of wireless connection.
def wifi rts
(1 ~ 2347)
2347
Configure minimum packets which enable RTS in
communication node.
def wifi fragment
<256 ~ 2346>
2346
Configure Maximum packet when sending with small
pieces of packet.
def wifi 802.11h
<Enable/ Disable>
Disable
Configure whether to use 802.11h spectrum manager
function.
def wifi roamming
[Enable/ Disable]
Disable
Configure whether to use roaming function of wireless
network.
def wiri
authentication
[open, shared,
wpa-psk, wpa2-
psk, wpa-none]
WPA2-PSK Select certification way when testing access point.
def wifi encryption
[none, wep, tkip,
aes]
TKIP Configure the way of encryption
def wifi keyindex
[1 ~ 4]
1 Select the index when Encryption is WEB