Solvline Eddy Serial Ver 2.1.0.3 - Manual (Page 56)

Chapter7. Appendix
56
def gateway
<Gateway address>
192.168.0.1
Set the default gateway Eddy is assigned to.
When line type is DHCP, it is not editable. Instead, current
gateway address is shown.
def dns
<IP address>
168.126.63.1 Set the Domain Name Service IP address.
def portviewip
<IP address>
0.0.0.0
Configures IP of PC which Portview is installed
If IP is set to 0.0.0.0, NMS feature is disabled.
(Please refer to Portview User’s Manual for detailed
information.)
def portviewport
<Port Number>
4000 Set the socket number of the PC with Portview installed.
def telnet
[Enable / Disable]
Enable
Enable or disable Telnet service.
If disabled, you cannot connect to Eddy via Telnet.
def ftp
[Enable / Disable]
Enable
Enable or disable FTP service.
If disabled, you cannot connect to Eddy via FTP.
def ssh
[Enable / Disable]
Disable
Enable or disable SSH service.
If enabled, you can connect to Eddy via SSH.
Def ddns
[IP Address]
203.32.117.1
If you set DDNS server IP , DDNS service will be enable.
But you set ‚0.0.0.0‛ ,this service will disable.
Def ddnsuser
[username]
eddy You can access DDNS server with this ID.
Def ddnspass
[password]
99999999 You can access DDNS server with this password.
def web
[Enable / Disable]
Enable
Enable or disable Web service.
If disabled, you cannot connect to Eddy via Web.
def target_agent
[Enable / Disable]
Disable
Enable or disable remote debugging function used by Eddy
development environment, LemonIDE.
For more information, please refer to LemonIDE user
manual in the SDK CD included in Eddy DK package.
def name
<Eddy name> Name of the
module
Set the name of Eddy module. (Max 32 bytes)
def snmp
[Enable / Disable]
Disable
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to
"ReadOnly.‛
In order to read and write attributes change the feature to
"ReadWrite.‛
(Options : ReadOnly/ ReadWrite)