Solvline Eddy Serial Ver 2.1.0.3 - Manual (Page 30)

Chapter4. Integration
30
If Eddy module is not on the same network as the PC you are working on, use ‚IP Configure‛ button to
temporarily assign an IP address that you would like to make a Web or Telnet connection to. If you assign a
temporary IP address to Eddy, you need to to change the IP address and restart in Web or Telnet.
Now you are ready to connect to Eddy! There are three options to configure Eddy.
1) Web
You can easily configure Eddy with web interface, accessible from any web browser. For more information, please
refer to
Chapter 5. Configuration via Web .
2) Telnet
You can configure Eddy with commands after accessing Eddy through Telnet. For more information, please refer to
Chapter 6. Configuration via Telnet .
3) Portview
You can use a Windows-based utility Portview from SystemBase to monitor Eddy. For more information on using the
utility for your administration purpose, please refer to Portview User Guide.