Peripheral settings, 6 peripheral settings – Solvline Eddy Serial Ver 2.1.0.3 User Manual

Page 45

Advertising
background image

Chapter7. Appendix

45

•AES : The Advanced Encryption Standard (AES) defines an encryption
algorithm in FIPS PUB 197.

Key Index

1

Selects the index of the key to be used from the created keys.
(Option: 1, 2, 3 and 4)

Key

None

Selects WEP 64-bit (Enter a Hex Key value directly).
(Example: 3132333435)
Selects WEP 128-bit (Enter a Hex Key value directly)
(Example: 31323334353637383940414243)

Password

None

Password for the TKIP encryption type.
(Up to 64 bytes)

Connection
Type

DHCP

Sets an IP address type in a wireless network.
(Option: DHCP, Static IP)
•DHCP : Assign a dynamic IP address through a DHCP server.
•Static IP : Specify an IP address manually.

IP Address

192.168.1.72

Sets an IP address of a wireless network.
If the line Type is Static IP, a user can enter an IP address directly. If line type is
DHCP, the current IP address is displayed. In DHCP type, the address cannot
be changed.

Subnet
Mask

255.255.255.0

Sets an IP address of a wireless network.
If the line Type is Static IP, a user can enter a subnet mask address directly. If
line type is DHCP, the current subnet mask address is displayed. In DHCP type,
the address cannot be changed.

Gateway

192.168.1.1

Sets a gateway address of a wireless network.
If the line Type is Static IP, a user can enter a gateway address directly. If line
type is DHCP, the current gateway address is displayed. In DHCP type, the
address cannot be changed.

DNS

168.126.63.1

Sets a DNS server address of a wireless network.
If the line Type is Static IP, a user can enter a DNS server address directly. If
line type is DHCP, the current DNS server address is displayed. In DHCP type,
the address cannot be changed.

5.6 Peripheral Settings

Configure operation mode and output value for each Programmable I/O pins.
Eddy includes GPIO pins that output 3.3V or detect 3.3V signals.
Eddy-CPU provides 56 GPIO ports, if you only use WAN port.
You can detect either any 3.3V signals from external device, or output 3.3V signal to the external device. You can

Advertising