Basic dive data – SUUNTO Zoop User Manual

Page 32

Advertising
background image

30

3.3.1. Basic Dive Data

The dive computer will remain in the Surface mode at depths less than 1.2 m [4 feet].

At depths greater than 1.2 m the instrument will go into the Diving mode (Fig. 3.6.).

ºC

TIME

DIVE

m

NO DEC TIME

T

C

B

MAX

Fig. 3.6. Dive starts.

All information on the display is labeled (Fig. 3.6). During a no-decompression stop

dive, the following information will be displayed:

• your present depth in meters [ft]

• the maximum depth during this dive in meters [ft], indicated as MAX

• the available no-decompression time in minutes in the center window as NO DEC

TIME and as a bar graph on the left side of the display. It is calculated based on

the five factors described in section 6.1. “Operating Principles”.

• the water in temperature in °C [°F] in the lower left corner

• the elapsed dive time in minutes, shown as DIVE TIME in the lower right corner

Advertising