Triner Scale TMU-295 - Manual (Page 48)

5-8 Commands
[Notes] • The printer can underline all characters (including the right-side
character spacing), but cannot underline the space set by an HT.
• When both double-height and double-width modes are selected,
quadruple size characters are printed.
• Only setting of underline mode specification have effect in page
mode.
• Only setting of 7
×
7 font specification have effect in page mode.
[Default] n = 0
ESC % n
[Name] Select/cancel user-defined character set
[Format] ASCII ESC % n
Hex 1B 25 n
Decimal 27 37 n
[Range] 0
≤
n
≤
255
[Description] Selects or cancels the user-defined character set.
When the Least Significant Bit (LSB) is 0, the user-defined character
set is cancelled.
When the LSB is 1, the user-defined character set is selected.
[Notes] • When the user-defined character set is cancelled, the internal
character set is automatically selected.
[Default] n = 0
[Reference] ESC &
ESC & y c1 c2 [X [d] y
✕
x] c2-c1+1
[Name] Define user-defined characters
[Format] ASCII ESC & y c1 c2 [x [d] y ✕ x] c2 - c1 + 1
Hex 1B 26 y c1 c2 [x [d] y ✕ x] c2 - c1 + 1
Decimal 27 38 y c1 c2 [x [d] y ✕ x] c2 - c1 + 1
[Range] y = 1
32
≤ c1 ≤ c2 ≤ 126
0
≤
x
≤
6 (5 ✕ 7 font)
0
≤
x
≤
10 (7 ✕ 7 font)
0 ≤ d1 ... dy ✕ x ≤ 255
[Description] Defines user-defined characters.
• The y specifies the number of bytes in the vertical direction.
• c1 specifies the beginning character code for the definition, and c2
specifies the final code. When only one character is desired, use c1
= c2.
• The allowable character code range is from decimal code 32 to 126.
• x specifies the number of dots in the horizontal direction.