Triner Scale TMU-295 - Manual (Page 8)

v
Introduction
The TM-U295 and TM-U295P are terminal slip printers which use a 7-pin shuttle dot
printing method, and provide the different modes, standard and page*.
The main features of the TM-U295 and TM-U295P printers are the following:
❏ Programmable page length
❏
Programmable print starting position
❏ Multiple character sizes (standard, double-width, double-height, and
quadruple)
❏ Character directions: 4
❏ International character set selection
❏ Forward and backward paper feeding
❏ Command protocol based on ESC/POS ® , a widely used standard
❏ Programmable paper feed amount
❏ Paper eject function
❏ Top Of Form (TOF) and Bottom Of Form (BOF) sensors
❏ Data reception during printing (improved throughput and less waiting time for
the host computer)
❏ 512 byte printer buffer memory
❏ Compact, space efficient design
❏ Drawer kick-out function
❏ Automatic Status Back (ASB) function to automatically send printer status
changes.
* In page mode, the print data for each page is stored in a specified printing
area in memory. After all the data for a page has been stored, it is printed.
❏ Bidirectional parallel interface in accordance with the IEEE 1284 Nibble/Byte
Modes
Please be sure to read the instructions in this manual carefully before using your new
EPSON printer.