USL JSD-100 Manual - Manual (Page 64)

Page 64
Min=-5
[Band4kHz]
Value=-2.5
Max=0.5
Min=-5.5
[Band5kHz]
Value=-3.5
Max=-0.5
Min=-6.5
[Band6.3kHz]
Value=-4.5
Max=-1.5
Min=-7.5
[Band8kHz]
Value=-5
Max=-2
Min=-8
[Band10kHz]
Value=-6
Max=-3
Min=-10
[Band12.5kHz]
Value=-8
Max=-5
Min=-13
[Band16kHz]
Value=-10
Max=-7
Min=-16
[Band20kHz]
Value=-12
Max=-9
Min=-19
MicDefault.ini
# This is the manufacture and characteristics for the selected microphone.
[Model]
Manufacture=USL
Name=ULTRA
# The Microphone Gain is the relative number of DB written to the RTA Mic Input
# Gain Control.
[SPL]
MicGain=0.0
# The Microphone frequency response is used to offset the RTA data being
# reported from the JSD-100. The RTA display will reflect the response and
# is also reflected in the Auto EQ execution. A positive value will increase the RTA
# display level for that band.
[Response]
Band25=0.0
Band31=0.0