VACUUBRAND CVC 3000 detect User Manual
Page 29
Control is running
Warning notice (if necessary in combination with other sym-
bols), flashing
Coolant valve switched on
Venting valve switched on
PC symbol: controller is in remote operation
Time meter is running (in function ”VACUULAN”); remaining
time in minutes is displayed
00:00:00
Vacuum control to a preset vacuum value
(here: 100 mbar/Torr/hPa) / Actual pressure is in the
range ”Set vacuum + hysteresis”
Pump down (continuous pumping)
Process runtime (only if process control is running)
5
In-line valve switched on
Level sensor activated; catchpot needs to be emptied.
Peltronic emission condenser connected
Pump symbol is displayed when pump is switched (only with
VMS).
100
Flashing: The actual pressure is greater than the preset max-
imum value (“Maximum“)
Minimum value (“Minimum“) reached
det.
Determination of boiling vacuum in program function /
Determination of boiling vacuum in detect function