VACUUBRAND VNC 2 - Manual (Page 15)

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999161 / 27/03/2012
page 15 of 45
VNC 2 connections
serial interface
RS 232 C
socket for connection of
pump or valve according
to voltage supply
(switch output)
sockets for connection of
coolant valve, venting valve, in-line valve,
level sensor, external pressure transducer
(VACUU•BUS)
vacuum connection
hose nozzle DN 10/6 mm
connection mains cable
fuse carrier
at switch output
Cut-out for front assembly (versions ”E”)
Note: The second label ”8 AT”
fixed with adhesive tape is in-
tended to be glued onto the front
plate of the laboratory furniture.