Read commands compatible to ”cvc 2000 – VACUUBRAND VNC 2 E User Manual
Page 27
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999199 / 28/11/2012
Read commands compatible to ”CVC 2000”
Function
actual vacuum
actual pumping speed
process runtime
LAN pressure increase
LAN process time
preset vacuum
speed
preselection
at controller
error status
VACUU•LAN: runtime of pump
since last switching of the pump
unit according to preselection
preset speed, 99.9 Hz
corresponds to ”HI”
Command
IN_PV_1
IN_PV_2
IN_PV_3
IN_PV_4
IN_PV_5
IN_SP_1
IN_SP_2
IN_CFG
IN_ERR
Description
unit according to preselection
Response
XXXX mbar or
XXXX Torr or
XXXX hPa
XX.X Hz
XX:XX h:m
xxx/min
XX:XX h:m
XXXX mbar or
XXXX Torr or
XXXX hPa
XX.X Hz
XXXXX
XXXX
1: last command to interface
incorrect
1: failure at pressure transducer
1: overpressure
1: external fault pump electronics,
valve, level sensor, ...
0: remote mode off
1: remote mode on
0: no automatic switch off
1: automatic switch off
0: no venting valve
1: venting valve
0: no coolant valve
1: coolant valve
0: VACUU•LAN
1: continuous pumping
2: vacuum control
4: RC 5 / RC 6 management