Canon B155 - Manual (Page 132)

What happens when Fax/Tel Mode is selected
To select Fax/Tel Mode
1
Press [Receive Mode] until ″ Fax/Tel Mode ″ appears in the LCD.
To change the Fax/Tel Mode settings:
1
Press [Function].
2 Press [ ] until RX SETTINGS is displayed in the LCD. Press [Start/Copy].
3 Press [ ] until FAX/TEL SWITCH is displayed in the LCD. Press [Start/Copy].
4 The LCD displays RING START TIME. Press [Start/Copy]. Choose between 0 and 30 SECONDS
using the numeric buttons, then press [Start/Copy] again.
5 The LCD displays F/T RING TIME. Press [Start/Copy]. Choose between 10 and 300 SECONDS
using the numeric buttons, then press [Start/Copy] again.
6 The LCD displays F/T SW ACTION. Press [Start/Copy]. Press [ ] or [ ] to choose RECEIVE
or DISCONNECT. Press [Start/Copy].
7 Press [Stop] to finish registration and return to the standby mode.
Type of call
Tel. charges begin for caller.
RING START TIME
(Factory setting = 8 sec.)
F/T RING TIME
(Factory setting = 22 sec.)
Telephone Fax Fax
Sending document
manually
Sending document
automatically
Fax answers without ringing
Fax listens for FAX TONE (For 8 sec.)
FAX TONE
detected
FAX TONE is not detected
Fax starts ringing
If you do not pick up the telephone within
22 seconds
F/T SW ACTION
Choose between: Receive and Disconnect
(Factory setting)
RECEIVE
Not all fax machines are capable of sending a FAX
TONE. For those cases if you set the F/T SW
ACTION to RECEIVE, the fax switches to receive
mode automatically and starts receiving the
document. If no document comes in it disconnects.
Document received
automatically.
(FAX TONE is detected
and fax switches to
receive mode.)
Pick up the telephone
to talk.
DISCONNECT
(Factory setting)
Fax disconnects the
call.
Appendix
120