Canon B155 - Manual (Page 19)

Loading the paper
Selecting the right kind of paper
The quality of the paper you use affects the print quality of the fax. Using paper that meets the
following specifications will ensure the best possible printing results.
Quality Use plain bond, typewriter quality without curls, folds, or rough edges.
Weight 64 g/m 2 - 90 g/m 2
Thickness 0.08 mm - 0.13 mm
Storage 18°C to 24°C, 40% to 60% relative humidity
Size A4, Letter, Legal
Note
¶ Test the plain bond paper you intend to use first to make sure printing results are satisfactory.
¶ Do not use punched or coloured paper.
¶ Do not use glossy paper.
¶ Ink drying time will vary depending on the type of paper.
¶ Using paper other than the above may cause jamming and/or blurred printing.
j Setting the paper size
The paper size setting determines the size of the recording paper in the paper tray. The factory setting is
A4 size. If you want to use a paper size other than A4, you must change the PAPER SIZE setting. See
FAX PRINTER, p. 88.
Loading the paper
1 Remove the paper tray cover. 2 Fan a small stack of up to 100 sheets (up
to 10 mm thick). Tap the edge of the
stack on a flat surface to even the stack.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
7