Verity Audio Amadis S - Manual (Page 9)

AMADIS OWNER’S MANUAL
R.1.0 September 2009
VERITY AUDIO
PAGE 9
SONIC PROBLEMS
Make sure:
1. every transducer is currently working and that none of
them seems to make any abnormal noises;
2. all polarities are respected and that all cables are
properly installed;
3. every transducer is properly sealed and that no air leak
seems to occur around the transducers while playing.
The sonic performance is closely related to your room
inherent characteristics, your speaker positioning and your
ancillary equipment. We recommend that you experiment
with these to find the best solution. For help, contact your
dealer or your Verity Audio service representative at (418)
682-9940 or email us at
[email protected] .
Customer Support
Verity Audio provides customer support and service for all
Verity Audio products. If you have any questions regarding
your new loudspeaker, call the Verity Audio help desk at
(418) 682-9940 or email us at [email protected].
Help is available Monday through Friday from 9:00 A.M. to
5:00 P.M. Eastern Standard Time (EST), except on holidays.
If you seem to have an operational problem, try to solve it
by referring to the information in the Troubleshooting
section. If you cannot quickly resume normal operation,
contact your dealer or Verity’s experienced support
personnel at the help desk.
Specifications
AMADIS
Specifications
Bandwidth: 20 Hz to 50 kHz  3.0 dB
Woofer: 9.5-inch doped polypropylene cone
3-inch SD voice coil
Midrange: 6-inch doped polypropylene cone
2-inch SD voice coil
Tweeter: 1-inch double ring
Power handling: 250 watts music power
Sensitivity: 93 dB @ 1w @ 1 m
Nominal impedance: 8 ohms
Minimum impedance: 3 ohms @ 5.5kHz
Break in time: 75 hours (63%), 400 hours (99%)
Dimensions & Weights
Height: 44.5 in. (113.0 cm)
Width: 12.8 in. (32.5 cm)
Depth: 13.5 in. (45.4 cm)
Weight: 150 lbs (75 kg) / pair
Gross weight: 190 lbs (86 kg) / pair
Features
Connectors: Custom • gold-plated • removable posts
Isolation cone: Custom • solid brass with s.s. Lockable spikes
Isolation platform: 1-inch damped aluminium
Available finishes
Standard High-gloss black piano
Special Order High-gloss wood finishes