Verity Audio Tamino Monitor - Packing / Unpacking Instructions User Manual

Tamino monitor

background image

Tel: (418) 682-9940
Fax: (418) 682-8644

[email protected]


1005 Saint-Jean-Baptiste, Suite 150
Quebec, QC G2E 5L1 Canada



P r o d u c t U n p a c k i n g I n s t r u c t i o n s

P r o d u c t U n p a c k i n g I n s t r u c t i o n s

P r o d u c t U n p a c k i n g I n s t r u c t i o n s

P r o d u c t U n p a c k i n g I n s t r u c t i o n s

The packaging accessories are:


(1) 18" x 14" x 19" cardboard box;

ii. (1) Inner cardboard sleeve;
iii. (1) Accessory box;
iv. (2) Top / bottom protective foam covers;

(1) Speaker grille;

vi. (1) Package containing the owner’s manual and

registration card.

The accessory box contains:


(2) Connector


1. Place one cardboard box on its back. See the printings on

the cardboard box;

2. Cut the two black straps;

3. Cut the packing tape that surrounds the cover;

4. Completely open the cover;

5. Extract the four wooden boards from each side;

6. Flip the cardboard in a manner to have the inner

cardboard sleeve on its upright position;

7. Gently take the inner cardboard sleeve and slide it

completely outside the main cardboard box;

8. Remove the loudspeaker grille and the owner’s manual

from the top protective foam board.

9. Cut the black straps fixed on the inner cardboard sleeve;

10. Gently take away the inner cardboard sleeve by sliding it

all the way up;

11. Remove the protective foam cover inserted on top of the


12. Detach the accessory box from the protective foam cover;

13. Carefully insert the hands inside the bottom protective

foam cover in order to take the bottom of the loudspeaker.
While lifting the loudspeaker, dislodge it from the bottom
foam cover.

14. Remove the plastic covering the monitor;

15. Screw the connector posts halfway at the rear of each


16. For proper installation, please read the Installation

Chapter of the manual;

17. Place unused accessories inside the box and store it away.