Verity Audio Tamino Monitor - Packing / Unpacking Instructions - Manual (Page 2)

Tel: (418) 682-9940
Fax: (418) 682-8644 www.verityaudio.com
[email protected]
2004.06.30
1005 Saint-Jean-Baptiste, Suite 150
Quebec, QC G2E 5L1 Canada
Tamino
Monitor
P r o d u c t P a c k i n g I n s t r u c t i o n s P r o d u c t P a c k i n g I n s t r u c t i o n s P r o d u c t P a c k i n g I n s t r u c t i o n s P r o d u c t P a c k i n g I n s t r u c t i o n s
The packaging accessories are:
i. (1) 18" x 14" x 19" cardboard box;
ii. (1) Inner cardboard sleeve;
iii. (1) Accessory box;
iv. (2) Top / bottom protective foam covers;
v.
(1) Speaker grille;
vi. (1) Package containing the owner’s manual and
registration card.
The Tamino Monitor loudspeaker is packed in a cardboard box
and provides space for:
i. (1) Tamino Monitor loudspeaker;
ii (1) Speaker grille;
iii. (1) Accessory box.
The accessory box contains:
i. (2) Connector posts.
1. Turn off the power amplifier(s);
2. Completely unscrew the two connector posts from the
Tamino Monitor loudspeaker and disconnect the speaker
cable;
3. Store two connector nuts in the accessory box;
4. Wrap the monitor with the plastic covering;
5. Lift and insert it into the bottom foam cover;
6. Place the top foam cover on top;
7. Cover the monitor with the inner cardboard box;
8. Strap the outside of the inner cardboard box in order to
hold together the bottom foam cover, the inner cardboard
box, and the top foam cover;
9. Open the main cardboard and place it in its vertical
position. Follow the directions printed on the main
cardboard box;
10. Gently slide the inner cardboard box inside the main
cardboard box, the front of the loudspeaker facing the
opening;
11. Carefully tilt and lay the main cardboard box on its back;
12. Place the four protective wooden boards inside the main
cardboard. One on each side.
13. Slide one grille between the top foam cover and the main
cardboard. The grille’s studs should be pointing towards
the speaker and plunged inside the foam;
14. Slide the owner’s manual between the wooden board and
the main cardboard box;
15. Close the cover of the box and tape it adequately;
16. Strap the box;
17. The Tamino Monitor is ready to be addressed and
shipped.