Vexilar FL-8 - Manual (Page 25)

25
TB0050
19 Degree Ice-Ducer. Self Leveling and
Floats in the Ice Hole. Comes with Float,
Stopper, and 7 Feet of Specially Designed
Cable.
TB0051
9 Degree Ice-Ducer. Self Leveling and
Floats in the Ice Hole. Comes with Float,
Stopper, and 7 Feet of Specially Designed
Cable.
TB0052
Dual Beam Ice-Ducer. Self Leveling and Floats in the Ice Hole.
Comes with Float, Stopper, and 7 Feet of Specially Designed Cable.
Built-In Switch Box must be Mounted within 3 Feet of the Depth
Finder.
"S" CABLE
The S-Cable (short for Suppression Cable) is used to reduce the
output power of the FL-8 or FL-8SLT. This can often help clear up
readings in shallow or cluttered waters. Simple installation between
the unit and transducer.
SB-100 Switch Box.
The SB-100 Switch Box allows you to run two transducers on one
FL-8 or FL-8SLT unit. You could switch between a trolling motor
mounted transducer and a stern mounted one or, while ice fishing,
switch between the hole you are fishing from and a remote hole. Also,
the SB-200 is available as a switch box for two units and one trans-
ducer.