Casio IT-2000W - Manual (Page 184)

184
Setting Cancellation of Next Resume Process
Sets the power-on process (Resume/Boot) for each power OFF reason. The default setting is
Resume On.
SYNTAX
int SYS_SetResumeCondition(int nCondition);
INPUT
nCondition = b0 Power key 0 = Resume On, 1 = Boot
b1 to b7 Reserved
b8 APO 0 = Resume On, 1 = Boot
b9 Software-triggered OFF 0 = Resume On, 1 = Boot
b10 to b15 Reserved
OUTPUT
= 0 Normal
= -1 Parameter error
Note :
With this function the power-on process can be set for each of the reasons the power is turned
OFF: Power key, APO, and Software-triggered OFF. Therefore, if set to "The next power-on
process is boot" from the application, it is necessary to specify all three parts with the
corresponding bits.