Winco GM100 - Manual (Page 5)

3. Enclosure
•
The product is housed in an 14”W x 10”H x 10”D
metal enclosure and supplied with four vibration
isolators to mount the unit to a horizontal surface.
•
Removing the eight sheet metal screws holding the
wrapping lid in place can access the inside of the
enclosure.
•
Wiring harness exits out a guarded hole in the
bottom of the enclosure.
Vibration Isolators
X 4
Wire Harness Exit
Engine Harness
GM100-H-10-E
(Sold Separately)
AC Harness
GM-H-5-AC
(Sold Separately)
4