Winco Mfg. S400 - Transfer Recliner - Manual

Page 1 of 8
006195 Revision GG Date 06-28-13 JWC
1. READ AND FOLLOW ALL DIRECTIONS.
2. NEVER USE the recliner ARMS, BACKREST or LEGREST as a seat; INJURY MAY OCCUR.
3. NEVER STAND on fold-out footrest – footrest is not a step; Tipping of chair could result and INJURY MAY OCCUR.
4. NEVER transport user with recliner arms in a “down” position; INJURY MAY OCCUR.
5. DO NOT put hands, feet or clothing into any openings when changing positions on recliner. Attendant MUST
confirm that users hands and feet are safe while changing recliner positions or INJURY MAY RESULT.
6. STAY CLEAR of the recline mechanisms.
7. Periodically, recheck tightness of all nuts, bolts and screws.
8. LOCK CASTERS at all times, except when transporting recliner.
9. USE SEAT BELT when transporting user.
10. DO NOT use recliner for Transporting in or with ANY type of vehicle or trailer. Winco recliners have not been
tested or approved for use by an occupant in any type of vehicle or trailer.
11. Immediately remove from service; Any recliner with broken recline mechanisms, torn upholstery, or other
mechanical or visible damage.
12. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
13. NEVER EXCEED the recommended weight capacity of 400 lbs. (181 kg).
14. SAVE THESE INSTRUCTIONS for future reference and training.
9681-S400
Transfer Recliner
CUSTOMER INSTRUCTIONS
(No assembly required)
Operating Instructions:
· FIG. 1: Footrest Plate Use & Adjustment
Access the footrest plate by pivoting the footrest pad down.
Adjustment: Locate the footrest adjustment knob just behind the footrest and turn
to loosen footrest
Once desired height of footrest is found, turn the knob the opposite way to tighten.
9681 & S400 Weight Capacity = 400 lbs. (181 kg.)
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377
before attempting to use this product; otherwise injury may occur.
Winco assumes no responsibility for damage or injury caused by improper assembly,
installation, use, or maintenance of these products.
IMPORTANT
DO NOT overtighten knob
DO NOT stand on footrest
FIG 1