Winco Mfg. 5111 - Activity Chair - Manual

Page 1 of 4
006085 Rev L Date 11-08-11 JWC
1. READ AND FOLLOW ALL DIRECTIONS.
2. NEVER use tray as a restraint.
3. ALWAYS fold footplate up before user enters or exits the chair; otherwise INJURY MAY RESULT.
4. DO NOT stand on plastic footplate; INJURY MAY RESULT.
5. Keep users hands and feet clear of any moving parts. Attendant MUST confirm that users hands and feet are clear
of moving parts when adjusting positions on tray or footrest or INJURY MAY RESULT.
6. Never use the chair arms or tray as a seat; INJURY MAY OCCUR.
7. Lock casters at all times, except when transporting chair.
8. Chair must ALWAYS be positioned on a level surface.
9. DO NOT use chair for Transporting in or with ANY type of vehicle or trailer. Winco chairs have not been tested or
approved for use by an occupant in any type of vehicle or trailer.
10. Immediately remove from service; Any chair with broken parts, torn upholstery, or other mechanical or visible
damage.
11. Periodically, recheck tightness of all nuts, bolts and screws.
12. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
13. NEVER EXCEED the recommended weight capacity of 275 lbs. (124.7 kg).
14. SAVE THESE INSTRUCTIONS for future reference and training.
5101-5111
Golden Years Chair
CUSTOMER INSTRUCTIONS
Tools needed:
 Slot-head screwdriver OR, 5/16”
wrench (multiple size wrench included)
 Scissors or box cutter to aid in removal of packing material
 Always start hardware together by hand first - Use of powered tools not recommended
Install the Back:
1. After checking your product for any shipping damage, chair needs to be positioned upright on level surface.
Remove all packing material and hardware that was secured for shipping. Cut tape and plastic with
scissors, being careful not to damage upholstery.
2. Use a standard slot-head screwdriver or 5/16” wrench; Remove the (2) screws that have been pre-installed
in the Seat Frame Rails. DO NOT discard screws.
3. To ease assembly, spray the Seat Frame Rail ends with WD-40 (or similar lubricant approved by your
facility).
5101-5111 Weight Capacity = 275 lbs. (124.7 kg.)
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377
before attempting to use this product; otherwise injury may occur.
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY
Winco assumes no responsibility for damage or injury caused by improper assembly,
installation, use, or maintenance of these products.