Winco Mfg. 2587 - Power Designer Blood Drawing Chair - Manual (Page 6)

6
Models 2570–2575:
Multiple size wrench included (or your own 5/16, 3/8” & 7/16” or adjustable wrenches)
Phillips-head screwdriver
Scissors or box cutter
Powered tools not recommended
Models 2577-2578 & 2587-2588:
Multiple size wrench included (or your own 7/16” or adjustable wrench)
3/16” Hex “Allen” wrench included
“Phillips-head” screwdriver – for checking tightness of all screws after shipping
Scissors or box cutter
Powered tools not recommended.
Before you begin:
Check your product for any shipping damage, remove all hardware and packing material that was
secured for shipping.
You may have to cut down the cardboard container with a box cutter to access the product. Use
CAUTION to avoid cutting your skin or damaging the product.
If you have questions about your assembly or if the product is damaged in ANY way, please contact
Winco Customer Support at 1-800-237-3377.
•
•
•
•
•
•
•
•
•
•
•
•
Tools Needed
Weight Capacities
Models 2570–2573, 2577-2578, & 2587-2588:
MAXIMUM Weight Capacity= 300 lbs. (136kg.)
Models 2574-2575:
MAXIMUM Weight Capacity= 450 lbs. (284 kg.)
•
•
Remove hair & body oils; Your recliner should be cleaned with mild soap & water solution and a damp cloth on a regular
basis (especially where skin & hair make contact with upholstery). Avoid harsh detergents or chemicals that could dam-
age the upholstery or finish of your recliner. If the recliner is disenfected, the chair MUST be wiped off with ONLY clean
water on a damp cloth.
Note: Disinfectants alone, will not provide adequate "grease or oil cutting" properties to remove hair & skin oils. Over
time, the appearance and feel of your upholstery may diminish if not cleaned
properly.
Please refer to the PERMABLOK
instruction tag that is attached to your Care Cliner for complete care and cleaning instructions.
Retain information on tag for future use
FOR FURTHER CLEANING INFORMATION VISIT:
http://www.wincomfg.com/permablok-info-and-cleaning-instructions
General Care & Cleaning