Wingscapes Birdcam Discovery Guide - Manual (Page 5)

Tripods
For very precise placement and
aiming, no mounting method will
beat a camera tripod. A standard
threaded tripod mount (¼"-20)
is embedded into the bottom
of every BirdCam. (Later mod-
els also have a second mount
embedded in the rear of the
camera). This allows users to at-
tach the BirdCam to any tripod
or any of thousands of 3rd-party
camera mounting accessories—
providing users with a world of
creative opportunities through
angle and height adjustment.
Mounting Straps
The BirdCam 2 stretch cords to
facilitate mounting. You will find
slots in the rear of the BirdCam
through which a cord can be
threaded. These slots can also
accept a hook from a stretch-
cord. Many users will tighten the
BirdCam to a tree, then wedge
a stick or piece of bark between
the BirdCam and the tree to
facilitate aiming.
Mounting Arm
Accessories
Wingscapes offers two optional
mounting accessories for the
BirdCam:
BirdCam Mounting Arm
(WSBR01) and
Outdoor Camera Mounting
Bracket (WSBR02).
Both accessories allow you to
easily mount the BirdCam to a
common bird feeder pole, a post,
a stake, a wall, or a tree. The
primary difference between these
two is that the BirdCam Mounting
Arm is longer. Numerous angle
settings and 360° rotation make
WINGSCAPES Backyard Bird Discovery Guide 3
these mounting arms one of the
most versatile setup options.
Your Wingscapes BirdCam
offers nearly limitless mount-
ing opportunities, allowing you
to capture images of wildlife in
practically any situation.
To read more about attracting
birds to your feeder and
BirdCam, visit our website at
www.wingscapes.com.
WINGSCAPES_Booklet_allvFINAL_11-8-13.indd 3 11/14/13 8:51 PM