Zipper's Performance 309-575 - Manual (Page 9)

Thunder Heart Performance Corp. 615-672-8811 www.thunder-heart.com
CHAPTER 4 IGNITION MODULE PROGRAMMING
The Digital Ignition Module can be programmed one of two ways: with the
built-in MODE and ARROW buttons, or with the (available separately)
SmartLink cable and software.
4.1 Ignition Programming Using Built-In Buttons
To program the Digital Ignition Module using the built-in buttons on the face
of the ignition, follow this procedure:
1. Turn the motorcycle key to ON, but do not start the motorcycle.
2. Press the MODE button to select “Initial Adv.”
3. Use the arrow keys to select the desired initial advance.
4. Press the MODE button to select “Maximum Adv.”
5. Use the arrow keys to select the desired maximum advance.
6. Press the MODE button to select “Max Adv RPM.”
7. Use the arrow keys to select the desired maximum advance.
309-575 TH-Zip Ignition.doc
5