Wheel and wheel trim care – Ram Trucks 2015 Cargo Van Commercial - User Guide User Manual

Page 119

Advertising
background image

CAUTION!

• Damage to the fuel system or emissions control system could result from using

an improper gas cap. A poorly fitting cap could let impurities into the fuel
system and may cause the MIL to turn on, due to fuel vapors escaping from the
system.

• To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling.

WARNING!

• Never have any smoking materials lit in or near the vehicle when the gas cap is

removed or the tank filled.

• Never add fuel when the engine is running. This is in violation of most state and

federal fire regulations and/or local bylaws, and will cause the MIL to turn on.

• A fire may result if gasoline is pumped into a portable container that is inside

of a vehicle. You could be burned. Always place gas containers on the ground
while filling.

E-85 FLEXIBLE FUEL — (3.6L ENGINE ONLY)

Refer to your Owner's Manual on the DVD for further details.

CAUTION!

Only vehicles with the E-85 fuel filler door label or a yellow gas cap can operate on
E-85.

WHEEL AND WHEEL TRIM CARE

All wheels and wheel trim, especially aluminum and chrome plated wheels, should
be cleaned regularly with a mild soap and water to prevent corrosion.

To remove heavy soil and/or excessive brake dust, use MOPAR

®

Wheel Cleaner or

equivalent or select a non-abrasive, non-acidic cleaner.

CAUTION!

Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use
oven cleaner. These products may damage the wheel's protective finish. Avoid
automatic car washes that use acidic solutions or harsh brushes that may damage
the wheel's protective finish. Only MOPAR

®

Wheel Cleaner or equivalent is

recommended.

M A I N T A I N I N G Y O U R V E H I C L E

117

Advertising