Ram Trucks 2015 Cargo Van Commercial - User Guide - Manual (Page 92)

Jacking Instructions
1. Loosen (but do not remove) the wheel
lug nuts by turning them to the left
one turn while the wheel is still on the
ground.
2. There are two jack engagement locations on each side of the vehicle body. These
locations are on the sill flange of the vehicle body.
Rear jack locations are between a pair of down-facing tabs on the sill flange of the
vehicle side body.
Front jack location is on the sill flange of the vehicle body and is located 6 in
(150 mm) from door edge.
Warning Label
Rear Jacking Location Engaged
Front Jacking Location Engaged
W H A T T O D O I N E M E R G E N C I E S
90