Turn signal/wiper/washer/high beam lever, Turn signal/lane change assist, Front wipers – Ram Trucks 2015 Cargo Van Commercial - User Guide User Manual

Page 32: Turn signal/wiper/washer/high, Beam lever

Advertising
background image

TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER

Turn Signal/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three

times and automatically turn off.

Front Wipers

Intermittent, Low And High Operation
• Rotate the end of the lever to the first detent position for one of five intermittent

settings, the second detent for low wiper operation and the third detent for high
wiper operation.

Rain Sensing Wipers

This feature senses moisture on the vehicle’s windshield and automatically activates
the wipers for the driver when the switch is in the intermittent positions. Refer to
“Programmable Features” in “Electronics” for further details.

Mist
• Push the end of the lever inward to the first detent when a single wipe is desired.

Multifunction Lever

1 — Mist (Push To First Detent)

2 — Rear Wiper/Washer

3 — Push Lever For High Beams

4 — Front Wipers

5 — Front Washer (Push To Second Detent)

O P E R A T I N G Y O U R V E H I C L E

30

Advertising