Ram Trucks 2015 Cargo Van Commercial - User Guide - Manual (Page 91)

4. Stand the tire/cover assembly upright and remove the wheel spacer by squeezing
the winch retaining tabs together. Push the retainer through the spare tire to
release it from the wheel.
Preparations For Jacking
1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas.
2. Turn on the Hazard Warning flasher.
3. Set the parking brake.
4. Place the shift lever into PARK.
5. Turn OFF the ignition.
NOTE:
Passengers should not remain in the ve-
hicle when the vehicle is being jacked.
• Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if changing the
right front tire, block the left rear
wheel.
Wheel Spacer
Wheel Blocked
W H A T T O D O I N E M E R G E N C I E S
89