Ram Trucks 2015 ProMaster Commercial - Owner Manual - Manual (Page 161)

Mute/Pause
Pushing this button mutes the sound. The display will
switch between ЉMUTE ONЉ and the previous display
(3 seconds).
Pushing the button again restores the audio without
changing the original volume setting. The display will
show ЉMUTE OFFЉ for three seconds, and then return to
the previous display mode.
When the
or , Audio, 1, 2, 3, 4, 5, 6, BAND/AS
buttons and SRC are pushed in ЉMute / PausedЉ
mode, these will be implemented and the audio will
be restored without changing the original volume.
Turn the ROTARY knob to restore the audio and change
the volume to the level selected. The display will show
the settings described in the volume function.
The other buttons should be implemented when pushed,
but the radio will remain in ЉMUTE ONЉ mode.
Storing Stations In Memory
Push and hold the memory buttons (1 through 6) for
more than two seconds to associate the tuned station
with the pushed button. The display will show a message
in ЉMEMO 2Љ format for three seconds to confirm that the
station has been tuned in. The CH signal is then activated
and the display will show the preset number and station
frequency for three seconds Љ2 106.9Љ. The display will
then return to the previous view.
Accessing Preset Stations
When the preset buttons (1 through 6) are pushed for less
than two seconds the radio will tune in to the station
associated with that particular memory location. The
display shows the preset number and frequency of the
associated station for three seconds. The display will then
return to the previous view.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 159