Ram Trucks 2015 ProMaster Commercial - Owner Manual - Manual (Page 81)

Forward And Rearward Adjustment
The adjusting bar is at the front of the seat, near the floor.
Pull the bar upward to move the seat forward or rear-
ward. Release the bar once the seat is in the desired
position. Then, using body pressure, move forward and
rearward on the seat to be sure that the seat adjusters
have latched.
Lumbar Support — If Equipped
This feature allows you to increase or decrease the
amount of lumbar support. The lumbar control knob is
located on the rear upper outboard side of the driver’s
seatback. Rotate the control forward to increase and
rearward to decrease the desired amount of lumbar
support.
Drivers Seat
1 — Forward/Rearward Adjusting Bar
2 — Lumbar Knob
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79