Loose fuel filler cap message, Vehicle loading, Vehicle certification label – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 275

Advertising
background image

• If the gas cap is not tightened properly, the MIL may

come on. Be sure the gas cap is tightened every time

the vehicle is refueled.

Loose Fuel Filler Cap Message
If the vehicle diagnostic system determines that the fuel

filler cap is loose, improperly installed, or damaged, a

“Check fuel cap” message will be displayed in the

Electronic Vehicle Information Center (EVIC). Refer to

“Electronic Vehicle Information Center” in “Understand-

ing Your Instrument Panel” for further information.

Tighten the fuel filler cap until a “clicking” sound is

heard. This is an indication that the fuel filler cap is

properly tightened. Refer to “Onboard Diagnostic Sys-

tem” in “Maintaining Your Vehicle” for further informa-

tion.
If the problem continues, the message will appear the

next time the vehicle is started. See your authorized

dealer as soon as possible.

VEHICLE LOADING
As required by National Highway Traffic Safety Admin-

istration regulations, your vehicle has a certification label

affixed to the driver’s side door or B-Pillar.
If seats are removed for carrying cargo, do not exceed the

specified GVWR and GAWR.
Vehicle Certification Label
Your vehicle has a Vehicle Certification Label affixed to

the drivers side B-Pillar or the rear of the driver’s door.
The label contains the following information:
• Name of manufacturer
• Month and year of manufacture
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR) front
• Gross Axle Weight Rating (GAWR) rear

5

STARTING AND OPERATING 273

Advertising