Ram Trucks 2015 ProMaster Commercial - Owner Manual - Manual (Page 162)

Retuning the band: When the BAND/AS button is
pushed for less than two seconds, the radio will alternate
between bands in the sequence: FM1 FM2 FM3
AM1 AM2 FM1. While changing bands from
the FM3 band to AM1, the display will show ЉAMЉ
for two seconds and when changing from the AM2
band to FM1, the display will show ЉFMЉ for two
seconds.
The display will then show the selected band and fre-
quency in the format ЉF1 106.9Љ for two seconds and then
return to the previous view.
Presetting stations with a strong signal: when the BAND/AS
button is pushed for more than two seconds, the radio will
search for the 6 best stations and automatically store them in
the 6 memory positions of the current band. During the
search, the display will indicate ЉFM ASTЉ or ЉAM ASTЉ,
depending on the band selected. To record the stations that
are found, these are sorted in ascending order of frequency
and the first one is stored in memory position 1, and so on,
until positions 1-6 are all in use. If fewer than 6 stations are
found, the unused channels will be allocated to the
107.9 MHz frequency for FM and AM 1710 KHz for the AM
band. At the end of the search process, the radio tunes in to
the first preset position and the display will indicate the
associated preset number (1) and the station frequency for
three seconds. The display will then return to the previous
view.
160 UNDERSTANDING YOUR INSTRUMENT PANEL