Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 228

Advertising
background image

The system’s pump motor runs during an ABS stop to

provide regulated hydraulic pressure. The pump motor

makes a low humming noise during operation, which is

normal.
The ABS includes an amber ABS Warning Light. When

the light is illuminated, the ABS is not functioning. The

system reverts to standard non-anti-lock brakes. Turning

the ignition Off and On again may reset the ABS if the

fault detected was only momentary.

WARNING!

Pumping the Anti-Lock Brakes will diminish their

effectiveness and may lead to a collision. Pumping
makes the stopping distance longer. Just press
firmly on your brake pedal when you need to slow
down or stop.

(Continued)

WARNING!

(Continued)

The Anti-Lock Brake System (ABS) cannot prevent

the natural laws of physics from acting on the
vehicle, nor can it increase braking or steering
efficiency beyond that afforded by the condition of
the vehicle brakes and tires or the traction afforded.

The ABS cannot prevent collisions, including those

resulting from excessive speed in turns, following
another vehicle too closely, or hydroplaning.

The capabilities of an ABS-equipped vehicle must

never be exploited in a reckless or dangerous
manner, which could jeopardize the user’s safety or
the safety of others.

When you are in a severe braking condition involving the

use of the ABS, you will experience some pedal drop as

the vehicle comes to a stop. This is the result of the

system reverting to the base brake system.

226 STARTING AND OPERATING

Advertising