Philips AZ241517 - Manual (Page 12)

CD PLAYER
PROGRAMMING TRACK NUMBERS
Select and store up to 20 tracks in the programme memory in the
desired sequence. You may store any track more than once. You
can programme tracks in the STOP position or during playback.
• When the programme memory is full, the display will show
FULL and it will not be possible to add further tracks to your
current programme.
Programming track numbers during playback
7. Select the desired track using SEARCH №< or until the
display shows the required track number.
2. Store the desired track by pressing PROGRAM once.
— The display will show program , the number of the stored
track, Pr and the total number of stored tracks.
3. Select and store all desired tracks in this way.
4. To play your CD programme in the desired sequence, first
press STOP ■ once and then press PLAY/PAUSE ►ll to start
playback, otherwise:
-* playback will start at the last programmed track, followed
by CD tracks in normal sequence instead of your
programmed sequence.
Programming track numbers from STOP position
7. Select the desired track using SEARCH or until the
display shows the required track number.
2. Store the desired track by pressing PROGRAM once.
-* The display will show program , the number of the stored
track, Pr and the total number of stored tracks.
3. Select and store all desired tracks of a CD in this way.
4. To play your CD programme in the desired sequence, first
press STOP ■ once and then press PLAY/PAUSE ►!! to start
playback, otherwise:
only the last programmed track will be played back.
Checking a programme
7. To review the set programme, press PROGRAM more than 2
seconds.
—The display will show the track numbers you have selected
in sequence.
— The display will show pr a <-< if no tracks have been
stored.
2. Start playback of the programme by pressing PLAY»PAUSE HI.
Erasing a programme
You can erase a programme by:
- pressing STOP ■ twice;
- opening the CD tray;
- pressing the POWER button to the off position.
12