Power supply – Philips AZ241517 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWER SUPPLY
m
3
(fi
MAINS
1.
Check if the mains voltage as shown on the type plate (on the
base of the set) corresponds to your local mains voltage. If it
does not, consult your dealer or service organisation.
2.
If your set is equipped with a voltage selector, set it to the
local mains voltage.
3.
Connect the mains lead (packed inside the battery
compartment) to the MAINS ~ socket and the wall socket.
- The set is now ready to use.
4.
To switch off the mains supply completely, pull the mains plug
out of the wall socket.
Note:
The display lights up only if the set is connected to the AC
mains power supply.
Switching POWER on / off: Save energy
Whether you are using mains or battery supply, to avoid
unnecessary energy consumption always push the POWER
button to the off position after using the set.
When the set is switched off the last source selected, tuner
presets, volume and sound settings will be retained in the set's
memory.
Environmental information
All redundant packaging material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard (box), expandable polystyrene
(buffer) and polyethylene (bags, protective foam sheet).
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.