Philips AZ241517 - Manual (Page 13)

CASSEHE RECORDER
CASSEHE PLAYBACK
/. Set the CD-TAPE-TUNER button to TAPE.
2. Press STOP* OPEN ■ 4 to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY ► and playback will start.
5. For brief interruptions, press PAUSE II. Press PAUSE II again
to resume playback.
6. By pressing ◄◄ or fast winding of the tape is possible in
both directions.
7. To stop playback, press ST0P»0PEN ■ 4.
— The keys are automatically released at the end of the tape,
except if PAUSE II has been activated.
8. To switch off the set, press the POWER button.
Wofe; While the PLAY ► or RECORD • keys are pressed on the
set, it will not be possible to change to another source.
O)
e
LU
CASSETTE RECORDING
General information on cassette recording
- Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
- This deck is not suited for recording on CHROME (lEC II) or
METAL (lEC IV) type cassettes. For recording you should use
NORMAL type cassettes (lEC I) on which the tabs have not
been broken.
- The recording level is set automatically. Altering the
VOLUME, INCREDIBLE SURROUND or DSC controls will not
affect the recording in progress.
- No recording will take place during the first 7 seconds, when
the leader tape passes the recorder heads.
- To prevent the accidental erasure of a recording, keep the
cassette side to be safeguarded in front of you and break out
the left tab. Recording on this side is no longer possible. To
render this safeguard ineffective, cover the tabs with a piece
of adhesive tape.
13