Sears 911. 47169 - Manual (Page 18)

REMOVABLE PARTS
REPLACiNG THE OVEN
LIGHT BULB
TO BMMQVB THE COVER:
1, Disconnect electrical power to the oven at
the main circuit breaker or fuse box,
2, Hold your hand under cover and firmly
push back the bail wire, until it clears and
releases the bulb cover.
REPLACE THE LIGHT BULB:
Unscrew the light bulb and replace it with a
40-watt home appliance bulb.
TO REPLACE COVER:
f. Place the bulb cover into the groove of the
bulb socket
2. Pull the bail wire forward until it snaps into
the indentation on top of the bulb cover.
2^ Reconnect the electrical power to the oven.
Do not touch a hot oven tight
bulb. Do not touch a bulb with
wet hands or wet cloth.
Never touch the electricalty
live collar on the bulb when
removing or replacing the
bulb. Do not remove any
screws.
OVEN DOOR
TO REMOWE:
Open the door to the broil
stop position. Grasp the
door on each side and lift
up and off the hinges.
CO
HOT LIFT THE COOR
BYTHEMAMCLE,
When the door is
removed and the hinge
arms are in the broil stop
position, do not bump
into the hinge arms.
They could snap back
and cause injury to
hands and damage the porcelain finish
of the front frame. Cover the hinge
arms with empty paper towel rolls or
towels while working in the oven area.
J
TO REPLACE:
Remove the paper towel
roils or towels. Make sure
the hinges are stiH in the
broil stop position. Grasp
the door on each side. Lift
the door over each hinge.
Line the slots at the bottom
of the door with the hinges.
Slide the door down over
the hinges as far as it will
go.
18