Sears 911. 47169 - Manual (Page 19)

To save you time and money, before making a service cali, check the list below for any problem
you may feel you have with the performance of your rangeJfthe problem is something you cannot
repair, use the Consumer Service Numbers located at the back of this manual. When making
any calls, haw® the m&d&l tmm&er, mpait parts list, use and care manual and the
data cf purchas® awailatl®.
BEFORE CALLING FOR SERVICE
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The display cf your
control Is flashing
"f“ followed by a
number or letter.
Range malfunction Press the CLEAR/OFF pad. Let the
range cool for 1 hour and place the
range back into an oven operation. If the
problem repeats, call for service.
Owen will not works
totally inoperative. No power to range a. Check the household circuit breaker
or fuse box.
b. Check to make sure the range is
plugged in.
Feeds de not hak®
properly.
a. Oven is not preheated a. Be sure to preheat until the tone
sounds.
b. Improper rack or pan
placement
c. Oven vent blocked or
covered.
d. Improper use of foil.
e. Improper temperature
setting for utensil used.
f. Recipe not followed.
g. improper oven control
calibration.
h. Range and oven rack
not level.
b. Maintain uniform air space around
pans and utensils. See oven cooking
section.
Keep vent dear. c.
e.
f.
SI-
Racks should not be covered during
baking.
Reduce temperature 25 degrees for
glass or dull/darkened pans
Check recipe and measurement.
Check the temperature adjustment
following this section.
Check the installation instructions for
leveling.
Oven tempemture
seems inaccurate.
Oven control calibration. See oven cooking section
Oven light does not a. Light switch is in off a. Check switch setting.
work. position.
b. Bulb needs to be b. Check or replace light
replaced buib.
19 before calling for service continued