Fcode, F-codes, Oven control, clock and kitchen timer – Sears 911. 47169 User Manual
Page 9: Toms, Settmq rm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OVEN CONTROL, CLOCK and KITCHEN TIMER
continued
Your new control has a series of tones that will
sound at different times. These tones may
sound while you set the control for an oven
function, or at the end of the oven function It
will also alert you there may be a problem with
the functions. Below are the types of tones
and a brief description of each
Toms
w«itE
SETTMQ rm
CONTROL
W hen you press a touch pad you will hear a
beep. This beep will let you know you have
placed enough pressure on the pad to
activate it (The arrow pads do not beep.)
EMB OF TiMEO CYCLE TONE
At the end of a timed cooking function, you will
hear 3 short beeps followed by 1 beep every
6 seconds. This 6 second beep will continue
to sound until the CLEAR/OFF pad is pressed
or you may select the special feature to cancel
this 6 second beep from sounding at the end
of future cycles.
TO CANCEL TNE B SECONO BEEF
1,
Press and hold the
BAKE
and
BROIL
pads,
at the same time
for 3 seconds,
until the display shows **SF"
2.
Press the
KITCHEN TIMER ON/OFF
pad. The display will show
“CON BEEP^*
(continous beep).
3.
4.
Press the
KITCHEN TIMER ON/OFF
pad again. The display will show
“BEEP”
(beep canceled).
Press the
START
pad.
If you would like to return the 6 second beep
repeat steps above until the display shows
your choice and press start.
ATTENTION TONE
This tone will sound if you make an error or an
oversight is made while setting an oven
function.
Examples would be:
-............ ..................—
a.
Setting a function and not pressing the
START pad.
b. Pressing an additional function pad
without setting a temperature or time first
Any of these can be quickly identified by
watching the display
PREHEAT TONE
W hen you set an oven temperature, the oven
automatically
starts
to
heat.
W hen
the
temperature inside the oven reaches the
temperature you have set, a tone will sound to
let you know the oven is ready for baking
FCODE
If you set an oven function and the control
beeps while the display is flashing
“F”
and a
number “F-4" or letter “FP* there may be a
problem with the control or oven Simply press
the
CLEAR/OFF
pad and wait about an hour
Try setting the function again. If the code
repeats, write down the flashing code and call
for service. Tell the technician what the
code was flashing.