Removable parts, Surface control knobs – Sears 911. 62041 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOVABLE PARTS
SURFACE CONTROL KNOBS
CLEANING MATERIALS TO USE:
• Dishwashing detergent
• Warm water
• Soft cloth
MOLDED
RIB
CLEAR GROOVE
IN STEM
TO REMOVE:
1.
Be sure the control knob is in the off
position.
2.
Pull straight off the stem.
Using a piece of string can make removing the
knob easier. Slip the string underand around
the knob, pulling straight out.
TO CLEAN:
Wash the knob thoroughly with soapy water.
Dry completely with a soft cloth.
DO NOT let
the knob soak.
TO REPLACE:
1. Check the back of the knob. The molded rib
of the knob is designed to fit perfectly onto
the knob stem.
2.
Align the molded rib to the clear groove in
the knob stem.
3.
Push the knob back as far as it will go.
13
removable parts continued