Nortel Networks NN42030-107 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing your MCC 3100 for Windows Mobile
Installing or upgrading MCC 3100 for
Windows Mobile
Install or upgrade MCC 3100 for Windows Mobile using one of the
following methods:
“Installing or upgrading from a computer” on page 22
“Installing the software over the air” on page 24
“Upgrading the software over the air” on page 26
“Performing an upgrade for a major release” on page 26
Consult with your system administrator for the preferred installation or
upgrade method.
Note 1: Disable sleep mode before you start the installation.
Note 2: Before beginning the installation, ensure that your device has
at least 10 MB of free hard drive space. If not, you will have to quit the
installation to free up additional space. You can add more space by
deleting unnecessary files or reducing the size of the Internet
Explorer Mobile cache.
Note 3: If you are upgrading from an earlier major release, you must
perform an initial software installation, not an upgrade. After the
installation, update the Server IP/Host address on the Login
Information screen if instructed to do so by your system administrator.
For more information, see “Performing an upgrade for a major
release” on page 26
Installing or upgrading from a computer
You can use your desktop PC or laptop computer to install or upgrade
your MCC 3100 software. Download the software to your computer,
connect your computer to the mobile device with a USB cable, and then
install the software by using Microsoft ActiveSync.
To verify that the data connection between MCC 3100 for Windows
Mobile and Mobile Communication Gateway 3100 (MCG 3100) is
established, see “Data connection between MCC 3100 for Windows
Mobile and MCG 3100” on page 107.
NN42030-107 MC 3100 3.1 Standard 03.03
November 2009
22