Threading the bobbin case – SINGER W7317 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. THREADING THE BOBBIN CASE
Before threading the bobbin case, study IFig. 8, 9, 10) to get a
general idea as to how it is done.
1)
Hold the bobbin case with your left hand and put the bobbin
into
the
bobbin
case
with
your
right
hand,
leaving
about
two
inches
of
the
thread
end
un
wound (Fig. 8). As the bobbin
is being inserted in the bobbin
case,
the
thread
flow
in
clockwise.
2!
While
holding
the
bobbin
case
as before, grasp the thread end
with
your
right
hand,
and
draw
it into the cross slot (Fig. 8).
3)
Then
pull
it
through
under
the
tension
spring
of
the bobbin case IFig. 9) until it enters the delivery
eye (Fig. 10!.