Drop feed control, Regulating stitch length, Drop-feed control – SINGER W7317 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
13. DROP FEED CONTROL
Push
button
drop-feed
regulates
the
position
of
the
feed
dog
for
sewing
very
thin
material
and
for
darning
and
embroidering.
For regular sewing, push down right button ¡A) full way (comp
letely).
For
silk
sewing,
(very
thin
materials)
push
down
the
left
side
button (B) half way until red line comes down to the surface
of the plate.
For
darning
embroidering
&
monogramming
sewing,
push
down
ihe left side button (B) full way, so that the material can be
moved freely.
Fig. 20
14. REGULATING STITCH LENGTH
Length of stitch can be adjusted by turning the stitch length
control knob (A), The numerals 0, 1,2, 3, A on the stitch
window will help you to select easily
The length, of the stitch is increasing from 0 ~ 4
When the control knob is sot at "0,, position, machine does
not feed materials.
Reverse
stitch
in
same
length
as
forward
stitches
will
be
obtained by pushing reverse button (C). over the control knob
Fig, 21
15