SINGER 10UJ13 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3-2 How to thread correctly
(1) Method for inserting upper thread
It is required that the thread be inserted
in the order shown in Figure 22.
After inserting the thread from the
front to the rear through the needle
eye while facing the machine, the end
of the thread should be pulled out for
about 10 cm from the needle.
^Tweezers are helpful for threading
needle eyes.
Figure 22
Tension discs
Pass thread between two tension discs. Figure 23
Advertising