SINGER 10UJ13 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
8 Correct threading at looper section.
Figure 11
Figure 12
(3) How to thread the upper thread correct
ly (needle thread)
The thread should be inserted in the
order shown in Figure 1 2.
After inserting the thread from the
front to rear through the needle eye
while facing the machine, the end of the
thread should be pulled out about 10
cm.
* Tweezers are helpful for threading
needle eyes.
Note: For overedging, the left-hand
needle should be removed (see
page 14)
Advertising